Indicator which can manage closing history of door(Drawer)by switching color. It is possible to check the sealed condition visually. Conventional sealed device was expendable, but this item can be used repeatedly since it is mechanical cable type.
用途
開扉履歴の管理が必要な扉(引出し)
Application
Door (Drawer) which require opening and closing history management.
Applicable Plate Thickness: t0.8/t1.2/t1.6/t2.0 [Dimensional Tolorance±0.05 (Except when installing to sheet metal)] Instruction(Refer to explanation of operation) ①In the state of this figure(State where the Sensing Pin protrudes),the indicator is red. ②By closing the door (drawer) from the state of this figure, push the Sensing Pin into the case.(Pushing amount: 4~6 mm) ③Insert the reset key into the reset hole while pressing the Sensing Pin pushed in, push down the indicator, switch the "red" display to "green", and complete the set. ④When opening the door (drawer) even once which has completed the setting, the indicator switches automatically from "green" to "red." After that, even if the door (drawer) is repeatedly opened and closed, it will remain "red" indication until the reset operation is performed using the reset key, and it will be possible to visually confirm that the opening / closing operation has occurred.
When installing to sheet metal,please apply sagging surface or C0.3 (thread chamfering) on the insertion side. Chamfering or R should be provided on the stopper side of the Sensing Pin.(Must be free from edge) (Recommended surface:over C3,R:over R4) Be sure to pull down the Indicator to the end. (Do not pull out reset key at wrong position.) When using with hinged door, please set the distance over R300 between this product and the center of rotation of the hinge. Please be sure to install in advance since rotation locus and shape of the Sensing Pin stopper are different depending on the installation position of the hinge. The door can not be locked by this product.