A simple lock whose installation hole has changed to hexalobular hole. It is expected to prevent from improper releasing since the figure was made for difficult to operate by general tools.
用途
防災機器・配電盤・分電盤・制御盤等
Application
Disaster preventing devices / Distribution boards / Distribution panels / Control boards, etc.
The rotation angle of the hexalobular hole is 90°between points A and B. It has detent mechanisms at point A and B. Able to change the fixed position for cam at every 90°. Recommended tighting torque : [fixing nut] 8.8N・m(90kgf・cm) [Pan Head Small Screw with Washer]2.0N・m(20kgf・cm)
Please use a dedicated key [TL-407-2](sold separately)or[a tool for hexalobular hole(with pin)"No. 40"](Commercially available)for locking. *When you use a commercially available tool, please use it after confirming if it is possible to insert the tool into the item. *[TL-407-2]is a dedicated key for [TL-407-1]. Please do not use it as an alternative item for a commercially available tool.