技術資料・注意事項トップへ Technical information
Back To Top
MENU

荷重試験 Load Testing

パチン錠強度試験

●試験目的
上蓋をとめる為に使用され、且つ、上蓋側に持ち上げるハンドルが付いている場合、筐体の重さが、蝶番とパチン錠にかかります。栃木屋では、右図のような引張試験を行い、お客様が選定しやすいよう許容荷重を設定しております。

●評価方法
荷重‐変位のグラフから、変形し始めの荷重を読み取り、そこから安全率を考慮し、許容荷重を設定しています。

Strength Test for Pull Down Catches

● Test Purpose
Using it for shutting the upper lid, and the weight of the box will load on the hinge and pull down catches. We are setting allowable load which will be easy to set by customers by performing tensile strength to the direction of figure 1.

● Evaluation Method
Setting allowable load by considering the safety rate based on the load from the graph of load displacement.

蝶番強度試験

●試験目的
縦使いの場合、蝶番には、扉のモーメントがかかります。栃木屋では蝶番の作動範囲中、一番変形しやすい状態で強度試験を行い、そこから参考扉重量を設定しています。参考扉重量の考え方は、参考資料「各蝶番に対する参考扉重量」を参照ください。

●評価方法
荷重‐変位グラフから、変形し始めの荷重を読み取り、そこから安全率を考慮し、一個あたりの許 容荷重を求め、その値を倍することで、2 個使いの参考扉重量を設定しております。

Hinge Strength Test

● Test Purpose
If it uses vertically, the door moment will be loaded on hinges. We run a strength test at the deformable condition during the operation range of hinges. Please see the page of "Reference of Door Weight for Hinges" for the way of thinking for the reference door weight.

● Evaluation Method
Setting allowable load per 1pc by considering the safety rate based on the load from the graph of load displacement, and setting the reference door weight for using 2 hinges by double the amount of the value.

取手強度試験

●試験目的
取手の寸法は様々で、指の入る本数に違いがあります。栃木屋では寸法により、入る指の本数を想定し、それに合わせた治具で、引張強度を測定し、許容荷重を設定しています。寸法による、想定している指の本数は、参考資料「パネル取手の想定荷重」を参照ください。

●評価方法
右図のような、取手の長さに対応する指の本数を想定した治具を用い引張強度試験を行います。 荷重─変位グラフから、安全率を考慮し、許容荷重を設定しています。

Pull Strength Test

● Test Purpose
The dimention of pulls are various, and the number of fingers fits the pulls are different. We set the allowable load by expecting the number of fingers fits the pulls by the dimensions, and measure the tensile strength by using jigs. Please see the page of "Assumption Load of Pulls" for the expected number of fingers by dimension.

● Evaluation Method
As the below figure, we run a strength test by using jigs based on expected number of fingers which corresponded to the length of pulls. Setting allowable load by considering the safety rate based on the load from the graph of load displacement.

栃木屋では、上記 3 つの商品群以外でも、お客様に、安心・安全にお使いいただけるよう、用途に応じた試験方法で評価しております。また、ご要望に合わせた試験も実施しておりますので、お気軽に最寄の営業所にお尋ねください。

For customers to use our products safely, we also run the other type of test except for the above three, depending on purposes.
Please feel free to contact us if you have any requests about the testing.